Screwed pipe Fittings

(low pressure)

They are majorly available in two standard types - 90 and 45 degree angles owing to their high demand in plumbing. The 90 degree elbow is primarily used to connect hoses to water pumps, valves, and deck drains.

while the 45 degree elbow is mostly used in water supply facilities, electronic and chemical industrial pipeline networks, food, air-conditioning pipelines, garden production, agriculture, and solar-energy facility.

These are the most commonly used fittings based on certain standards. For instance, there are threaded fittings of pipes in BSP, NPT, UNF sizes for permanent, high-pressure pipe connections.

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line.

A pipe nipple is a length of straight pipe with male threads on both ends.

They are used to fit straight end hose or pipe. A combination of pipe nipples are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam.

A coupling is a pipe fitting used to stop leakages in broken or damaged pipes. The pipes to be connected should be of the same diameter. The two kinds of couplings used in plumbing are regular coupling and slip coupling.

A locknut, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut, stiff nut or elastic stop nut, is a nut that resists loosening under vibrations and torque

Cast 150LBS Fittings are suitable for use at pressure temperature rating from MSS-SP-114

All 150LBS Stainless Steel Pipe Fittings are identified with Nominal Pipe Size, and Material Grade

Cast 150LBS Pipe Fittings are manufactured from material conforming to

ASTM-A-351 (CF8/304, CF8M/316)

It is a connector or a coupling threaded on both ends. Pipe nipples are used to allow plumbing to be connected to a water heater or other plumbing.

It is a connector or a coupling threaded on both ends. Pipe nipples are used to allow plumbing to be connected to a water heater or other plumbing.

The pipe fittings are used to close the ends Plugs of the pipe either temporarily or permanently.

These pipe plugs are designed to insert into the end of tubing to dead-end the flow.

Pipe Union is a type of fitting equipment designed in such a way to unite two pipes which can be detached without causing any deformation to the pipes.

small diameter piping connections requiring a positive seal and easy assembly as well as disassembly are made with the help of pipe union. In other words, the pipe unions can disjoint two pipes very easily. They are widely demanded in the pipe fitting market.

Pipe plugs are defined as cap end of fractional tubes used in a large number of industries.

Various materials are used to manufacture high quality tube plugs in a variety of end connections.

A threaded insert, also known as a threaded bushing, is a fastener element that is inserted into an object to add a threaded hole. They may be used to repair a stripped threaded hole

There is either one inlet and three outlets or vice-versa to flow water or any other liquid in four different directions. These kinds of pipe fittings are commonly used in oil,water,natural gas,Chemical，Sewage

They slide into soft tubing. For low-pressure installations, tubing elasticity holds the tubing onto the fitting.

Pipe caps act as protective device and are designed to protect pipe ends of various shapes. The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes.

They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks.